Protohaund Help

English

Русский

English

Русский

Appearance

WeAct USB2CANFD — connection ​

For WeAct Studio USB2CANFD V1 with factory SLCAN firmware, install the WeAct package. In Settings → Connections → Transport, select WeAct and the WeAct USB2CANFD (COM…) port.

Line settings ​

  • Baudrate CAN: nominal bus bitrate.
  • CAN FD mode: CAN FD with supported firmware.
  • CAN FD data baudrate: CAN FD data-phase bitrate.

A nominal bitrate of 800 kbit/s is supported starting with firmware 1.0.0.3; earlier versions use 750 kbit/s. Available data-phase bitrates are 1, 2, 3, 4, and 5 Mbit/s. Choose values that match the line and adapter firmware.

See CAN FD support boundaries and connection troubleshooting.

Protohaund is independent software and is not affiliated with, endorsed by, sponsored by, or certified by any third-party organization referenced in the application.Third-party names, trademarks, product names, device names, protocol names, and standards are referenced solely to identify vehicle applicability, supported products, technologies, protocols, formats, or compatibility.All third-party trademarks and other marks are the property of their respective owners. Their use does not imply any affiliation with, endorsement of, certification of, or approval of Protohaund by their respective owners.Compatibility is limited to the features, devices, protocols, standards, and versions explicitly documented by Protohaund.